FREE UK MAINLAND SHIPPING OVER £50

phone: 01392 949012

Exoracing Turbo Compressor Nipple 1/8" Npt

£19.99
(Inc. VAT)
£16.66
(Ex. VAT)
£19.99
(Inc. VAT)
£16.66
(Ex. VAT)

Not In Stock | ETA: 4-6 Weeks

Exoracing Easter Sale Banner
SKU:
EX-BRA-COM
Availability:
In Stock Products Dispatched Within 24 Hours | Daily Cutoff: 12:30pm
Shipping:
Calculated at Checkout
  • Free Shipping

  • Returns Policy

  • Protected Payments

  • Performance Car Brands

Why use An Exoracing Turbo Compressor Nipple?

So, you've finally installed your new turbo on your project car. Everything is ready to fire up, but you realize you still need to sort your vacuum lines to your compressor housing! This is where our range of compressor housing nipples comes in handy. We've got different variations available to ensure you can finish your turbo conversion and make some boost!

When you purchase an aftermarket turbo, some will already have barbs/nipples on the compressor housing for adding your vacuum lines, which is great if it's the correct type for your build. Often, we see turbo compressor housings with straight barbs. Still, once mounted, you may have to swap over to a barb that protrudes from the housing at 90 degrees, allowing you to run your vacuum line close to the housing. 

All of our turbo compressor nipples are compatible with turbos with a 1/8th NPT thread, and we can also adapt to a barb or an04 thread, allowing you to run a PTFE braided hose as your vacuum line.

Our turbo compressor nipples are all brass, which has many benefits for this application. One of the main reasons we have chosen brass is its exceptional malleability. This means they're less brittle than steel and less prone to snapping when fitting or removing them. They'll also provide a fantastic seal with the NPT thread from correctly galling when fitted. The other main reasons to use brass for your compressor nipples are its resistance to high temperatures and corrosion resistance.

With a 90-degree option and also a straight option for your turbo compressor nipples, we've been sure to supply every option you should need to package your vacuum lines around your turbo.

Exoracing turbo compressor nipples are a reliable, sturdy solution for your vacuum lines, and they are simple to install and reuse! 

Purchase Includes:

  • 1 x Exoracing 1/8"NPT Turbo Compressor Nipple
  • 1 x Exoracing Lifetime Warranty

Features:

  • Standard thread size: 1/8" 27 NPT for a leak-free seal.
  • Compatible Vacuum hose ID: 5-6mm.
  • Material: Brass.
  • Fitting angle: 90 degrees or straight.
  • Barbed nipple or An04 for the use of PTFE hose.
  • Reusable design.
  • Corrosion resistant.
  • Different variations are available.
  • Exoracing Lifetime Warranty.

Exoracing 1/8"Npt Turbo Compressor Nipple Installation Guide:

Exoracing turbo compressor nipples are super easy to install when following our instructions. However, we always recommend a professional installation if you are not confident in any processes involved:

  1. The first step is to confirm you have the correct thread type in your compressor housing and that your vacuum hose will fit onto the fittings barb (5-6mm inner diameter).
  2. Start by threading your turbo compressor nipple into the compressor housing until finger-tight. 
  3. Tightening up the fitting must done with care; our general recommendation for a 1/8th NPT fitting would be 2-3 full turns of the fitting after you reach finger tight. However, this is just a recommendation, and caution must be taken!
  4. Connect up your vacuum hose to the turbo compressor nipple and ensure a leak-free seal has been established. 
  5. Now you've successfully installed your turbo compressor nipple, remember to take some pictures and send them to us at @exoracinguk.

Technical Specifications:

Straight:

Material: Brass
Barb Length: 14mm
Barb Width: 6.5mm
Weight: 10g
Thread type: 1/8" 27 NPT
Spanner size: 12mm
Maximum continuous Temperature: 400°F/204°C
Fitting angle: Straight
Warranty: Exoracing Lifetime Warranty

90 Degree:

Material: Brass
Barb Length: 14mm
Barb Width: 6.5mm
Weight: 15g
Thread type: 1/8" 27 NPT
Spanner size: 12mm
Maximum continuous Temperature: 400°F/204°C
Fitting angle: 90 Degrees
Warranty: Exoracing Lifetime Warranty

90 Degree Long:

Material: Brass
Extended neck length: 25mm
Barb Length: 12mm
Barb Width: 6.5mm
Weight: 24g
Thread type: 1/8" 27 NPT
Spanner size: 12mm
Maximum continuous Temperature: 400°F/204°C
Fitting angle: 90 Degrees
Warranty: Exoracing Lifetime Warranty

90 Degree An04:

Material: Brass
Weight: 26g
Thread type (compressor side): 1/8" 27 NPT
Thread type (vacuum side): AN04
Spanner size: 12mm
Maximum continuous Temperature: 400°F/204°C
Fitting angle: 90 Degrees
Warranty: Exoracing Lifetime Warranty

Notes:

  • Professional installation is recommended. 
  • Do not overtighten the fitting; it uses an NPT thread, so it will NOT thread all the way to the bottom of the thread.
Category:
Exhaust System
Exoracing lifetime warranty emblem

Exoracing Ltd offers a lifetime warranty against manufacturing defects on this Exoracing Ltd product for peace of mind and a risk-free buying experience! We have 100% faith in our products and know they are of the highest quality, so where most manufacturers offer a year, we decided to offer a massive lifetime warranty.

Exoracing Ltd lifetime warranty will cover repairing, replacing, or store credit to the same purchase value if the part has since been discontinued, at our discretion, for any Exoracing Ltd product that is found defective.

Exoracing Ltd's lifetime warranty policy will only apply if the product was purchased through ourselves or an officially licenced distributor in our network.

This warranty policy is non-transferable and all claims under this policy must be accompanied by the original receipt of sale.