Being able to trust your push-on fittings are not going to leak is a must for any mechanic or DIY enthusiast.
Our push lock hose ends are designed to hold a seal and not work loose, even under vibration. If you plan on using our push lock hose on fluids exceeding 50 degrees C, we recommend using a hose clamp to ensure no leaks.
Once our push lock hose ends have been fitted, they will need to be cut to be removed.
Our push lock hose ends are NOT for use with braided AN hose, as we cannot guarantee a proper seal. All our AN fittings are manufactured from 6061-T6 aluminium alloy and then anodised with a sleek, hardwearing coat to protect them.
Sizes:
- AN04
- AN06
- AN08
- AN10
- AN12
Angles:
- Straight
- 30°
- 45°
- 60°
- 90°
- 120°
- 150°
- 180°
- Type:
- Swivel Seal Fitting
- Material:
- Aluminium
- Colour:
- Black