Each kit contains:
- 1 X Precision Machined Billet Timing Chain Cover
- 1 X 0-Ring
- 3 X M6 Torx BZP Countersunk Bolts
Begin by removing the old steel Tensioner Cover using a thin screwdriver to prize the OEM cover off the Cam Chain Cover. Use a sharp knife or scraper to remove all of the old Hondabond from the mounting surface. Install the O-Ring into the new Billet Tensioner Cover and install onto the Cam Chain Cover, do up the 3x Torx bolts to 12 Nm (8.7 lb/ft) of torque and your done!