Our range of Braided AN Hose is available in a range of different types including Standard, PTFE and Push Lock. Our AN Hoses are suitable for a wide range of automotive applications including Fuel, Water and Oil Lines.
Standard and PTFE Hose are available in Stainless Steel and Nylon.
Each hose type is specifically designed to work with the corresponding AN Fittings, i.e., PTFE Hose is only compatible with PTFE Hose Fittings.
Where temperatures exceed 70°c, the use of Hose Clamps is recommended.
AN Hose is sold per meter and supplied in uncut lengths up to 20m.
AN fittings and hose are the perfect alternative to standard metal piping or OEM fuel / coolant / oil lines. They are more flexible in design than standardised hose, and due to being able to make the lines to your exact specification are more versatile.
This Hose is like Aeroquip, Earls, Russell, and other performance AN hose. The hose is made from Stainless steel braided hose which uses a synthetic rubber hose and is one of the strongest fluid transfer hoses on the market. By using an outer braid of oil resistant high-quality nylon, the line is incredible strong and versatile.
- Can be used for fuel / coolant / oil lines
- Extremely versatile as can be made to your exact spec
- synthetic rubber
- Not Suitable for race fuel
- Core: Reinforced Chlorinated Polyethylene (CPE)
- Supplied in lengths up to 20m
- Length 1M
|AN Hose Type||Push Lock|
|AN Size||AN12, AN -12|
|Inside Diameter (I.D)||19.05mm||3/4"|
|Outside Diameter (O.D)||25.4mm||1"|
|Min Temperature||-40 °c||-40 °F|
|Max Temperature||100 °c||212 °F|
|Operating Pressure||17.23 bar||250 psi|
|Compatibility||Coolants, Oil, Air, Fuel Systems, Methanol, E85, E10, Lubricants|
|Material||Reinforced Chlorinated Polyethylene (CPE)|