Why Use An Exoracing Turbo Oil And Water Line Kit For Subaru Impreza Td04L?
At Exoracing, we are dedicated to supplying you with quality parts. We only use the best available materials and advanced manufacturing techniques, like in our turbo oil and water line kits.
Our turbo oil and water line kit for the OEM Subaru WRX/Forester turbo system includes replacement water feed and oil drain lines, ensuring that your vehicle runs smoothly and efficiently. We also provide a turbo and downpipe gasket, which guarantees that your car will boost like it did when it was new from the factory.
If you find an exhaust leak from your turbo, you could have a blown-out gasket or even a flange that warped too much to stay sealed. If you are removing your turbo for any reason, we always recommend changing the gaskets, but before doing so, ensure that the mating faces are free from warpages and defects.
Having an exhaust leak in your car will not only affect the power delivery of your engine but could also cause damage to your turbo over time and will even fail an MOT!
If your turbo is suffering from a water or oil leak from the pipework, you could severely damage your turbo and engine. This is why we have included and recommend changing all the hardware possible to avoid leaks in the future.
Purchase Includes:
- 1 x Exoracing Turbo Gaskets For Subaru Fits Impreza Td04 Td05 Td06.
- 3 x Feed and drain pipes.
- 1 x Oil return gasket.
- 2 x Oil return hardware.
- 4 x M14 Banjo bolts.
- 2 x M10 Banjo bolt.
- 2 x M14 Copper washers.
- 1 x M10 Copper washer.
- 1 x Exoracing 1 Year Warranty.
Features:
- Includes oil return pipe, water feed and return pipes, gaskets and hardware.
- 304 Stainless Steel Turbo Gaskets.
- Zinc-plated hard pipes and hardware.
- Designed to fit: - Subaru Impreza/ WRX-nb 98~03
- OEM fitment.
- Will stop water, oil and exhaust leaks from your turbo.
- OEM part number ( 2000-882-210 | 320-14049-005 | 49377-04300)
- Exoracing 1 Year Warranty.
Exoracing Turbo Oil And Water Line Kit For Subaru Impreza Td04L Installation Guide:
We've compiled a step-by-step guide to help you install your TD04 pipe and gasket kit. This is quite an involved job, so if you are not confident, we recommend getting a professional to carry out the installation.
- To start the installation, get your car secured on axle stands or a car ramp and ensure everything is cool to touch before you start work.
- Begin removing anything that blocks access to the turbo, such as the intercooler and possibly the expansion tank.
- Now you can see the turbocharger. Start at the top and remove the oil feed line and any vacuum lines coming off the turbo.
- Next, you can remove the five bolts holding the turbo to the downpipe, giving you more access to complete the following steps.
- Remove the three bolts that secure the turbo to the manifold and the clamp that holds the turbo inlet pipe in place.
- You now have plenty of access to remove any final water/oil lines from the turbo.
- Your turbo is now ready to be removed from the car and inspected for damage.
- Once you are satisfied with the condition of your turbo, we can change over the oil drain pipe and gasket; make sure to clean the area before seating your new gasket.
- Tighten the bolts that hold the drain pipe in place to Subaru's recommended torque values.
- Replace the water lines going into the side of the turbo and tighten the banjo bolts back to the manufacturer's recommended torque values.
- Bolt your turbo to the downpipe and the manifold, tightening all the bolts to the recommended torque values.
- Finally, you can reinstall your turbo vacuum lines.
- Reinstall anything that was previously removed to gain access to your turbo.
- Once you have installed everything, it's good practice to run your car through a few heat cycles and then recheck all the hardware is still tightened to the manufacturer's torque values.
- You can now drive your car with the peace of mind that the job has been done correctly with quality parts! Don't forget to take pictures and tag us in them at @exoracinguk
Technical Specifications:
Gasket Material: | 304 Stainless Steel |
Gasket Depth: | 0.5mm |
Pipe Material: | Zinc-plated mild steel |
Oil Drain Bolt Spanner Size: | 10mm |
Water Pipe Bolt Spanner size: | 19mm |
Oil Feed Bolt Spanner size: | 14mm |
Kit Weight: | 342g |
Fitment: | Subaru Impreza TD04L |
Warranty: | Exoracing 1 Year Warranty |
Notes:
- Before purchasing, please check the water line banjo bolts on your car are M14.
- OEM part number ( 2000-882-210 | 320-14049-005 | 49377-04300)
- Category:
- Exhaust System
![Exoracing 1 year warranty emblem](https://cdn11.bigcommerce.com/s-2qhgaelfmo/images/stencil/original/image-manager/warrant1year.png?t=1709658512)
Exoracing Ltd offers a 1 year warranty against manufacturing defects on this Exoracing Ltd product for peace of mind and a risk-free buying experience! We have 100% faith in our products and know they are of the highest quality.
Exoracing Ltd’s 1 year warranty will cover repairing, replacing, or store credit to the same purchase value if the part has since been discontinued, at our discretion, for any Exoracing Ltd product that is found defective.
Exoracing Ltd's 1 year warranty policy will only apply if the product was purchased through ourselves or an officially licenced distributor in our network.
This warranty policy is non-transferable and all claims under this policy must be accompanied by the original receipt of sale.