When monitoring the pressure of your fuel, oil, or wastegate, the Haltech 250psi TI Fuel/Oil/Wastegate Pressure Sensor 1/8" Npt is an excellent choice. However, taking care when wiring this sensor is essential, as incorrect wiring can cause damage.
It is worth noting that all "TI" MAP and Pressure sensors are electronically tested before being packaged and are sold "as is" and without any further warranty. Returns of opened sensors are not accepted.
The Haltech 250psi TI Fuel/Oil/Wastegate Pressure Sensor includes a matching plug, pins, and a -4 AN adaptor. However, it is essential to note that "TI" Pressure sensors must not be mounted directly to the fuel rail or block. Instead, they should be remote-mounted and connected via a flexible hose. If required, use a Pressure Sensor Extension Hose to ensure proper installation.
In summary, the Haltech 250psi TI Fuel/Oil/Wastegate Pressure Sensor 1/8" Npt is a reliable and accurate way to monitor pressure, but it must be installed correctly to avoid damage. Take care when wiring and ensure the sensor is installed adequately via a flexible hose.
Features:
- Includes: Matching plug and pins, -4 AN adaptor.
- Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
- Product Type:
- Sensors
- Variation:
- Pressure Sensor
- Manufacturer:
- Universal
- Thread:
- 1/8 Npt
- Category:
- Electronics