What Does An Oil Catch Can Do?

An oil catch can is a simple device that can do wonders in preventing oil and other contaminants from causing build up inside your engine's intake manifold.

The science behind it is pretty straightforward.

The catch can is designed to plug into a hose from the top of your engine's crankcase to the intake manifold or vented to the atmosphere. Once installed, it relieves pressure in the crankcase caused by blow-by.

Blow-by is when exhaust gases escape past the piston rings and enter the crankcase. Without an oil catch can, this can lead to oil build up and other harmful contaminants inside the intake manifold.

Direct-injected engines shoot fuel directly into the cylinder, which makes it easier for gunk to build up. Fuel acts as a cleanser in port-injected engines, but this is not true for direct-injected engines.

As a result, a catch can serve as a filter by catching the contaminants before they reach the intake.

The market offers various oil catch cans, from simple push-fit options to complex battery tray replacement catch cans designed for specific car models like the Exoracing 4 port baffled catch can.

Why Should You Use An Oil Catch Can?

The catch can is an essential engine breather and intake system component. It functions as an oil/air separator, effectively removing oil vapour from the air circulating through these systems.

One reason for the need for an oil catch can is the imperfections in internal combustion systems that can lead to positive crankcase pressure.

This pressure occurs when pressure from the combustion chamber enters the oil pan or crankcase, and it is released through a ventilation system known as the positive crankcase ventilation valve.

However, positive crankcase pressure is not the only issue that catch cans address.

Engine friction-reducing characteristics prevent piston rings from creating a perfect seal against the cylinder wall, causing oil droplets to vaporize. This occurs when pressurized air mixes with the spinning crankshaft and other engine components.

These vaporized oil particles contain combustion-produced contaminants that escape through the positive crankcase ventilation valves and are redirected back into the engine's intake system.

While this process is necessary to reduce air pollution and comply with guidelines, it can harm the intake system.

That's why the catch can is so important. It captures these oil droplets before mixing with the air and entering the engine's intake system.

By removing these droplets, the oil catch can help reduce the amount of oil consumed by the engine.

How To Install An Oil Catch Can

If you're considering installing an oil catch can in your vehicle, following a series of steps is essential to ensure proper installation. First, take the time to locate a suitable spot in the engine bay.

You'll want to choose a location that allows easy access to the drain plug if your catch has one. Once you've found a suitable spot, use the installation brackets provided with your catch can mount it securely.

The next step is to connect the intake port to your valve cover. Depending on the type of catch can you have, you'll either use push type or AN fittings.

If you opt for the AN10 catch can option, you may need to weld an AN fitting to your valve cover or use an adapter if you don't have one.

AN10 is typically the most common size, providing enough diameter to prevent blockages and allow optimal flow.

[dib_prod_223]

To learn more about the different types of AN hose such as rubber and PTFE watch our video below, or read our ultimate AN fittings guide.

Finally, it's time to attach the outlet port. You can connect it to the intake or leave it open if you're venting to the atmosphere. If you need help determining which option to choose, refer to a diagram for guidance on the most common installation method. With everything securely connected, you're good to go!

Oil Catch Can Pros And Cons

Incorporating an oil catch can into your car's setup presents a range of benefits with minimal drawbacks. Beyond the advantages already highlighted, additional perks to be gained from installing one in your vehicle are worth exploring.

While these lists may not cover every possible reason, they provide a solid overview of the main factors influencing your decision to either utilise or stay away from an aftermarket oil catch can setup.

There are a wide variety of ranges and styles such as the Speedfactory Racing angled catch can or Exoracing AN10 2-port catch can.

By examining these lists, you can arrive at an educated conclusion regarding whether or not installing one in your vehicle is the right choice for you.

Oil Catch Can Pros

1. Helps to keep the air intake clean
2. Generally simple and easy to install
3. Increases the percentage of oxygen in the intake
4. Traps harmful vapour
5. It can improve fuel economy
6. Setup can be cheap
7. Multiple sizes and variations of catch cans

Oil Catch Can Cons

1. The catch can periodically needs draining
2. You may not have suitable room in your engine bay
3. Old PCV systems may need removing
4. May need valve covers welding if using AN fittings

Conclusion

It is worth noting that even a budget catch can is better than nothing, and the only challenge that comes with it is figuring out how to mount one under your hood and remembering to empty it periodically.

Investing in an oil catch can be worth considering if you want to keep your engine running smoothly and efficiently.

Hopefully, the information in our article has helped guide you towards making an informed decision about the suitability of an oil catch can setup for your needs.

However, if you still have any lingering doubts or questions regarding any of the points covered in the article, please feel free to contact us or leave a message below.

Our team of experts will be more than happy to assist you in finding the most appropriate and effective solution to meet your requirements.