2.2kw Micro Heater 12v

The 2.2kw Micro Heater is T7designs smallest and lightest hot water-based heater available, making it perfect for applications where weight or space is the number one priority.
The heater uses a specially designed copper & brass heater core which utilises micro tube technology, a high fin density, and thin tube walls that offer exceptional heat exchanger performance in a tiny package.
A lightweight axial fan draws air through the heater core and expels it through the single 2.5" outlet nozzle. These fans are 50% lighter and use 25% of the power over traditional centrifugal blowers.
The Micro Heater is ideal for vehicles to defrost windscreens or a backup heating device for cars if you already have a heated windscreen. These work perfectly with one or two of our universal defrost vents feeding the windscreen. If you are going to utilise the vehicle's existing full width defrost vents and under dash ducting, it is recommended to use a larger heater model.
Typical weight savings over a production vehicle heating system can be more than 6kg.

Wiring Information

The fan has no onboard speed control, the simplest way to operate this fan is to use an ON/OFF toggle or rocker switch. If you would like to adjust the fan speed please see our PWM fan controller.

Please ensure your supply is fused appropriately, it is recommended to use a 3a fuse and that your cable is rated higher than the fuse.

Dimensions

ATTENTION

• Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
• Not suitable for use in cooling systems that run at pressure higher than 2 bar (28 psi).