Whether you are trying to swap out your OEM fuel system for something more robust or just trying to tidy up your engine bay, this centre feed fuel line kit is as good as it gets. It is compatible with petrol and e85 and features our innovative quick-connect fitting for the firewall connection.
It makes installation a breeze compared to conventional nut-style fittings used on competing designs. Each hose features a reinforced rubber inner structure with a braided exterior that helps prevent cuts and abrasions to the hose.
The 1/4" SAE Quick-Connect firewall side fitting features redundant seals for protection against leaks, and the An06 fuel rail side fitting will attach to any An06 male fitting. For added peace of mind, we pressure test every fuel line after assembly to ensure all connections are pressure-tight.
This line is compatible with virtually any K-Series fuel rail with a centre port (when used with an appropriate adapter). If you prefer a side-feed configuration on your fuel rail, this line can also be routed to the port on the side of the fuel rail closer to the gearbox.
Since we are all about the fine details, each fuel line comes with a bracket that rigidly affixes the line to the backside of the gearbox to ensure the line isn't moving around during spirited driving or track events.
The fuel line can even be unclipped from the bracket to make removal easy when you're servicing other parts of your car in the future. Trusted by pro-am racers and street enthusiasts alike, if you are looking for the best for your vehicle, this is the centre-feed fuel line for your build.
Kit Contents:
- Preassembled Fuel line (-6AN straight connection at fuel rail, 1/4" SAE Quick-Connect connection at firewall)
- Bracket to affix fuel line to gearbox
- M6 hex screw for bracket
- 2x Zip ties (to affix fuel line to bracket)
Fitment:
- '02-'05 Honda Civic Si*/R*
- '02-'06 Acura RSX-S*
- '02-'06 Honda Integra Type R*
- '06-'11 Honda Civic Si*/R*
- '12-'15 Honda Civic Si*✝
Notes:
*When paired with a centerfeed-compatible fuel rail and -6AN fitting
✝Requires use of an intake manifold with a gap between the center two runners sufficient to pass fuel line through (RBC or similar)
You will need a -6AN adapter fitting that is compatible with your rail's center port. This can vary depending on the rail. The part # for ACUiTY's -6AN to -8ORB adapter is 1913-F03.
- Category:
- Fuel System