Applications: EG, DC2 & EK (w/ EKK2 mounts only) with OEM or aftermarket RSX/EP3 Radiator.
K-Tuned has added yet another custom rad hose kit for K-swapped vehicles. This set of upgraded hoses was designed to fit perfectly in a handful of K-swapped cars using the OEM RSX/EP3 radiator and most RSX/EP3 specific aftermarket units.
Note that the DC5 TYPE R rad is a full width rad, so some simple modification and movement of the rad mounting tabs will be required for proper fitment on Civics.
K-Tuned rad hoses are made from strong, heat resistant, high grade, 4-ply reinforced silicone. The inner layers of silicone are red and the outer layer is finished in black with white K-Tuned logos at each end. These will fit with all PRB/PRC, RBC/RRC, and Skunk2 intake manifolds. No more installation headaches or messing around with universal hoses.
These hoses come in two options, K20 and K24. The difference is the upper radiator hose. The K20 option is designed for cylinder heads with the coolant housing on the front. The K24 option is for cylinder headers with the upper coolant housing on the side. Both options will require a thermostat housing that is pointed down, like most K20s.
Installation Guide
We have now written a full guide detailing how to install the hoses from start to finish, so click the link below to head over to this guide. Although in the video, we installed a Honda D-Series hose kit, the same process would apply to any hose kit you are trying to install:
- Manufacturer:
- Honda
- Model:
- Integra Dc5 02-07
- Engine:
- K20
- Engine:
- K24
- Product Type:
- Radiator
- Category:
- Heat Management
