phone: 01392 949012

AN Straight Swivel Push Lock Hose End Barb Fitting Black

£14.99 - £28.99 (Inc. VAT)
£12.49 - £24.16 (Ex. VAT)
£14.99 - £28.99 (Inc. VAT)
£12.49 - £24.16 (Ex. VAT)

Not In Stock | ETA: 4-6 Weeks

Exoracing free shipping banner
In Stock Products Dispatched Within 24 Hours | Daily Cutoff: 12:30pm
Calculated at Checkout
  • Free Shipping

  • Returns Policy

  • Protected Payments

  • Performance Car Brands

Any mechanic or DIY enthusiast must be able to trust that their push-on fittings will not leak. At Exoracing, we're dedicated to supplying parts that won't let you down but will also excel, especially in a motorsport environment!

Our push lock hose ends are designed to hold a seal and not work loose, even under vibration. If you plan on using our push lock hose on fluids exceeding 70°C, we recommend using a hose clamp to ensure no leaks. 

Once our push lock hose ends have been fitted, they will need to be cut to be removed. 

Our push lock hose ends are NOT for use with braided AN hose, as we cannot guarantee a proper seal. All our AN fittings are manufactured from 6061-T6 aluminium alloy and then anodised with a sleek, hardwearing coat to protect them. 

Purchase Includes:

  • 1 x Exoracing AN Straight Swivel Push Lock Hose End Barb Fitting
  • 1 x Exoracing Limited Lifetime Warranty


  • Machined from 6061-T6 Aluminium Alloy
  • 360-degree adjustability
  • Available in a range of sizes from AN04 to AN12
  • Available in multiple degree sizes from straight up to 180 degrees
  • Perfect for oil, fuel, and coolant lines
  • Simple to install
  • Exoracing limited lifetime warranty

Exoracing Push Lock Hose Installation Notes

Installing a fitting onto your push-lock rubber hose may seem simple. However, as the tolerances are quite fine, the smaller sizes can be tricky.

It might be tempting to pick up that old pot of grease you have lying around. Although it will help with installation, different types of grease can eat away at the rubber, stop it from sealing correctly or get into the fluid and cause issues further down the line. There are specific approved water-soluble assembly lubes that can be used, such as Dixon P-80 emulsion assembly lube. Using such products will aid assembly and then dry without any adverse effects on your connection.

We've written an in depth guide for hose assembly which you can read by clicking the link below:

AN fitting installation guide

Technical Specifications:

Material: 6061-T6 Aluminium Alloy
Adjustability: 360-degree
Available Sizes: AN04/AN06/AN08/AN10/AN12/
Available Degree Bends: 0°/30°/45°/60°/90°/120°/150°/180°
Fluid Compatibility: Oil, Fuel, Coolant (No fuel rated above E5)
Fitment: Nylon Or Stainless Rubber Braided Hose
Fitting Style: Push Lock
Warranty: Exoracing Limited Lifetime Warranty


  • Professional installation is always recommended.
  • Please ensure you have selected the correct size and angle before ordering.
  • Not rated for fuels above E5. If you use E5 or above, such as race fuel, please visit our PTFE listing.
Swivel Seal Fitting