Exoracing Turbo To Manifold Gasket Kkk K03 K03S Golf Leon Beetle

Why Use An Exoracing K03 Turbo Manifold Gasket?

Our range of Exoracing gaskets are produced to the highest quality possible. We use only the most advanced manufacturing techniques and quality materials to ensure you receive the best parts possible.

The job of your K03 turbo manifold gasket is to seal the flange between your turbo and manifold to stop exhaust gases from leaking. If this gasket is damaged or missing, you will suffer from a terrible exhaust leak. This will not only negatively impact your performance but also cause you to fail an MOT!

Our K03 turbo manifold gaskets are cut using precision cutting machines, meaning your gasket will mate perfectly to your turbo manifold with OEM fitment. We've chosen to use 304 stainless steel as this offers great formability when being pressed, as well as excellent heat and corrosion resistance.

When replacing your turbo manifold gaskets, it's essential to check the mating flanges for defects or warpages, as this will prevent the gasket from sealing. If you find any damage to your flanges, it's vital to get them resurfaced flat at a machine shop to stop any leaks. By doing so, you can help extend your turbo's lifespan and keep your engine running as efficiently as possible. 

Purchase Includes:

• 1 x Exoracing K03 Turbo Manifold Gasket
• 1 x Exoracing Lifetime Warranty

Features:

• 304 Stainless Steel for heat and corrosion resistance.
• Will fit turbos with kkk k03 manifold flanges.
• The gaskets only weigh 7g, which is incredibly lightweight!
• Fixes exhaust leaks from worn or split gaskets.
• Exoracing Lifetime Warranty.

Exoracing K03 Turbo Manifold Gasket Installation Guide:

Here's a step-by-step guide to help you install your new K03 turbo manifold gasket successfully. If you are not confident working on cars, we recommend a professional installation. 

1. The first step to installing your K03 turbo manifold gasket is to secure your car and ensure everything has cooled down if it was recently running. 
2. Remove anything from around the turbo that will prevent you from removing it from the manifold. This usually includes the downpipe, air filter and heat shielding.
3. Next, remove the oil/water lines from the turbo and be ready to catch any fluids that may spill during removal.
4. Now, you can remove the three bolts/studs that secure the turbo to the manifold and remove the turbo from the car.
5. Now that you have your turbo out of the vehicle, you can check the mating flanges for damage and warpages. If any are found, you must have the faces resurfaced to ensure a proper seal.
6. You can now reinstall your turbo to the manifold with your new gasket and reinstall the downpipe.
7. Tighten the hardware holding the turbo to the manufacturer's specs using a calibrated torque wrench.
8. Reinstall your turbo oil/water lines and any other removed components.
9. Run your car through a few heat cycles, checking for exhaust leaks and making sure it cools down fully between cycles. 
10. Recheck the torque values of the hardware to make sure everything is seated correctly. 
11. You are now ready to drive! Don't forget to take photos and tag us in them @exoracinguk

Technical Specifications:

Replaces OEM Turbo Part Number:

• 5303-970-0005
• 5303-970-0011
• 5303-970-0029
• 5303-970-0035
• 5303-970-0044
• 5303-970-0045
• 5303-970-0052
• 5303-970-0058

Notes:

• Professional installation is always recommended.
• Please ensure the flanges are clean and flat to prevent the gasket from blowing out.
• We always recommend changing the gasket every time you remove the turbo.