Conversion Engine Mount Kit for the 1990-1993 Honda Accord EX (CB)
Designed to fit the stock automatic Accord EX CB7/CB9 chassis when converting to an H-Series engine or an F-Series engine with a 94-01 transmission.
- Unique No-Tear Vibration Minimizing Bushings
- CAD/CAM Designed
- Uses Stock/OEM Hardware
- Stress Analyzed
- Lifetime Warranty
NOTE:
- In order to use this kit you will need to use the 90-93 Accord F-Series engine timing belt post mount.
Honda Part Number: 90008-PM3-000
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist. Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
Optional front torque mount is also available(Does not work with the Innovative Mounts' traction bar) :
- 90-93 ACCORD REPLACEMENT FRONT TORQUE ENGINE MOUNT (F-SERIES / MANUAL) - 29340
Weight 16lbs
Honda Part Number: 90008-PM3-000
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist. Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
Optional front torque mount is also available(Does not work with the Innovative Mounts' traction bar) :
- 90-93 ACCORD REPLACEMENT FRONT TORQUE ENGINE MOUNT (F-SERIES / MANUAL) - 29340
Weight 16lbs
- Manufacturer:
- Honda
- Model:
- Accord Cb 90-93
- Engine:
- H-series
- Engine:
- F-series
- Product Type:
- Engine Mount Kit
- Material:
- Steel
- Polyurethane Rating:
- 95A
- Category:
- Engine
- Category:
- Suspension And Handling