Competition/Traction Bar Kit for the 1992-2001 Honda Prelude (BB)
Designed to replace the stock crossmember of the Prelude BB chassis.
- Works With A/T & M/T
- Comes with Optional Front Torque Mounting Bracket for use with our Front Mount
- Includes 2 tow hooks
- Gives Extra Front Clearance
- Clears All Factory Headers
- Enhances Vehicle Rigidity and Overall Driving Accuracy
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension. By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design it will also accept the use of larger downpipes and manifolds.
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
NOTE:
- This traction/competition bar kit was NOT designed to fit the 97-01 Prelude SH/BB6 trim. For that vehicles application, please see:
97-01 PRELUDE TYPE SH REPLACEMENT CROSSMEMBER BAR - 50111
- This kit also comes with a transmission underside brace. This brace is unnecessary if you purchase our optional front mount, which bolts to our competition/traction bar:
92-01 PRELUDE / 94-97 ACCORD FRONT TORQUE MOUNT - 29740
Weight: 30lbs
- Manufacturer:
- Honda
- Model:
- Prelude Bb 92-96
- Model:
- Prelude 97-01
- Engine:
- H-series
- Engine:
- F-series
- Product Type:
- Traction Bar
- Material:
- Steel
- Category:
- Engine
- Category:
- Suspension And Handling