Our Neoprene heater ducting is constructed from high-quality 1-ply neoprene coated glass fibre fabric with a bronze plated steel wire helix. This ducting is exceptionally durable, lightweight, but most of all, it conforms to tight corners with ease whilst maintaining its diameter.
The ducting can be supplied in one uncut length up to 4m only. If you order a quantity of 2, it will be supplied as a single 2m length.
Our heater ducting is manufactured to a high standard in the UK.
Specification | Metric | Imperial & Other |
| Inside Diameter | Ø 51 mm | Ø 2.0" |
| Outside Diameter | Ø 53.6 mm | Ø 2.11" |
| Bend Radius | 25 mm | 1.0" |
| Weight | 0.25 kg/m | 0.17 lb/ft |
| Minimum Temperature | -50 °C | -58 °F |
| Maximum Temperature | 150 °C | 302 °F |
| Material Outer | Single Ply Neoprene Glass Fibre Fabric | |
| Material Wire | Bronze Plated Steel Wire Helix | |
| Country of Manufacture | United Kingdom | |
| Part Number | 0C8-008-1E0 | |
ATTENTION
- Please double check that you are ordering the correct diameter for your application prior to checkout.
- Category:
- Engine