Nuke Performance Low Profile Competition Fuel Cell Unit For ATL Fuel Cells With Integrated Surge Tank

• Fits your standard aftermarket fuel cell.
• Low weight "drop-in surge tank" for your fuel cell.
• Integrated 2 litre Fuel Surge Tank functionality
• Single ORB10 (7/8" UNF) outlet fitting, for a trouble-free installation.
• Single or dual high-pressure fuel pump compatible.
• Specifically fits all ATL branded fuel cells.
• Low profile fuel filler cap with integrated roll-over valve.

Kit Contents

Further Information

Integrated 2 Litre surge tank and billet fuel pump hanger for single or dual fuel pumps.

The unique CFC Unit from Nuke Performance works as a fill plate replacement for fuel cells with the standardised 6x10" 24-bolt pattern fill plates from manufacturers such as ATL, Premier, Pyrotect, Fuel Safe, Radium etc. The CFC Unit is the perfect solution for a simplified high performing fuel system where safety is of highest importance. With the integrated drop-in surge tank, this setup eliminates the need for a space-consuming external surge tank. With all the needed fuel pumps mounted within the fuel cell itself, this product is the only thing you need. The simplicity of its design frees up space and weight while increasing safety, as fewer fuel line fittings are necessary and no external fuel pumps are used. With its unique low-profile billet design, this is the most lightweight solution on the market and lets you save crucial weight in your racecar.

Internal high-pressure fuel pumps, for any need between 200 - 2000hp.

This high-profile CFC Unit fits all of the most common fuel pumps, both 39mm and 42mm body diameter. Together with the Nuke Performance fuel pump mounting kits, it has never been this easy to set up a high-performance fuel system. And every little part of the CFC Unit is guaranteed to work perfectly with alcoholic fuels, such as Ethanol even during long-term usage.

How to mount fuel pumps within the Nuke Performance high-profile CFC Unit for ATL Saver cell fuel cells?

The single fuel pump mounted in the fuel cell functions as a pickup fuel pump that ensures that the high-pressure fuel pumps within the oversized 2 litre surge tank always has enough fuel to maximise fuel flow and minimise the risk of fuel starvation that can seriously harm your engine. For more information, please download or view the attached user manual. The high-profile edition CFC Unit is delivered with everything you need to install the fuel pumps of your selection, but we recommend adding one of Nuke Performance's fuel pump mounting kits for optimal functionality. All fuel pumps are securely mounted in all conditions thanks to the billet fuel pump brackets.

Which brands and what type of fuel cells can be used with the high-profile version of the Nuke Performance CFC Unit?

The high-profile CFC Unit is developed out of the low-profile version, but with the addition of being able to, without any modifications, mount the CFC Unit into the popular Saver Cell fuel cells from ATL, and Fuel Safe fuel cells. These fuel cells have a smaller opening than other common fuel cells, demanding this new design. One benefit of this higher profile design is that it requires less minimum mounting depth, at 197mm (7.75") instead of the 219mm from the previous slim-design version. This high-profile version offers the minimum mounting depth and fits smaller openings while boasting the same undisputable top-notch functionality and just a little bit more weight than the low-profile lightweight version.

How to connect fuel pumps to the electrical connectors and fuel lines?

The CFC Unit from Nuke Performance utilises over-dimensioned electrical connectors is a fail-proof setup, you will not have to worry about the connectors being overloaded when running on high ampere. For the lift fuel pump you have two electrical connectors and for the high-pressure fuel pumps you have a total of three connectors, letting you run a dual fuel pump setup in two steps or simultaneous if preferred. The fuel line connects to the included barb fittings, but we recommend adding one of the fuel pump mounting kits for your selected fuel pumps to get all the benefits of easy maintenance, fail-proof functionality and long-run durability even when running alcoholic fuels such as Ethanol.

Low profile fuel filler cap or remote fill neck for 50mm fuel fill hose?

The CFC Unit is delivered with a low profile filler cap with integrated roll-over protection. But for those who prefer to utilize a remote fill, we offer a remote filler neck for a 50-52mm fuel fill hose. It fits straight into the CFC Unit and uses the integrated roll-over protection mounted on the underside of the CFC Unit. The remote filler neck is available as an accessory.

Choose the right Fuel Level Sender Unit for your aftermarket fuel cell.

For most applications, an accurate fuel level sender is required to get an optimal experience. The Nuke Performance CFC Unit fits most common fuel level senders that utilise the 5-bolt SAE pattern. The CFC Unit is delivered with a low profile and lightweight, block-off plate that easily can be swapped for a fuel level sender of choice. You can get your CFC Unit delivered with an FLS, make sure to select the right length when placing an order. For easy selection, measure the depth of your fuel cell and subtract approx. 20mm (0.78") and select the fuel level sender that comes closest to your measurement.

How to fit the CFC Unit to your own custom fuel cell.

The CFC Unit is made to fit the standard 24-bolt pattern 6x10". We offer an aluminium flange that makes it possible to bolt the CFC Unit to a custom-manufactured fuel cell that utilizes this standard pattern. You could either weld it to your Aluminium cell or copy the pattern to your top sheet and bolt the CFC Unit to it putting the top sheet in between the flange and the CFC Unit. The CFC Unit is delivered with a Viton gasket (safe for all types of fuels) that fits perfectly for custom fuel cell applications.