SpeedFactory Universal Intake / Exhaust Manifold Titanium Stud Set
This kit includes (10) M8 x 1.25mm x 55/65mm Ti 6Al-4V studs, nuts, and washers.
Use of factory exhaust manifold bolts and studs, especially with an aftermarket intake manifold or header/turbo system, can result in stripped or broken bolts and inadequate clamping force, resulting in leaks. Our studs look great and will allow you to properly clamp the intake or exhaust manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust and corrosion.
SpeedFactory Titanium studs are made of Ti 6Al-4V and incorporate a 3mm hex key tip that allows them to be easily installed using an Allen wrench. A Titanium 10mm 12-point nut and washer are included.
Titanium is ~45% lighter, stronger, and will not corrode like your stock steel bolts or studs! Each stud/washer/nut assembly weighs only 12g!
raw finish
-Universal M8x1.25mm thread pitch fits many popular applications for intake and exhaust manifolds.
-Fits all Honda/ Acura DOHC B Series (B16, B18, B20), all D15, D16, F20B, F20C, F22C, H22, H23, and more.
Installation Guide:
We have written a full guide for how to install titanium intake or exhaust studs. This guide includes images of every step and a video if you would rather watch the installation process.
Just click the link here to head over to our installation page:
- Product Type:
- Titanium Exhaust Studs
- Product Type:
- Titanium Intake Studs
- Manufacturer:
- Universal
- Model:
- Universal
- Colour:
- Raw
- Category:
- Dressup
- Category:
- Engine
