phone: 01392 949012

Davies Craig EWP130 Electric Water Pump & Digital Controller 12v

(Inc. VAT)
(Ex. VAT)
(Inc. VAT)
(Ex. VAT)

Only 3 Left In Stock! | Dispatch Within 1 Working Day

Exoracing free shipping banner
In Stock Products Dispatched Within 24 Hours | Daily Cutoff: 12:30pm
Calculated at Checkout
  • Free Shipping

  • Returns Policy

  • Protected Payments

  • Performance Car Brands

Davies Craig EWP130 & Digital EWP/Fan Controller Kit 12v

Take total control of your engine cooling with the Davies Craig EWP130 Alloy Electric Water Pump and Digital LCD EWP / Fan Controller. The Controller will also manage the operation of your Electric Radiator Fan.

The EWP130 (130 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It's a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

EWP130 Specs Metric Imperial & Other
Flow Rate (Max) @ 13V DC 130 L/min 34.34 US Gal/min
Min Temperature -40 °C -40 °F
Max Temperature 130 °C 266 °F
Inlet / Outlet Size 35 mm 1.3/8"
Weight 1.23 kg 2.7 lbs
Burst Pressure 500 kPa 72.5 psi
Nominal Voltage 12V DC
Operating Voltage 3-15V DC
Max Current 10A @ 13V DC
Pump Material Powdercoated Aluminium


Controller Specs Metric Imperial & Other
Settable Temp Range 40 - 110 °C 104 - 230 °F
Fan Cut In Temp 3°C 5.4°F
Dimensions 95 x 130 x 25 mm 3.7 x 5.1 x 1"
Voltage Range 12 - 29V DC
Max Current 12a
Temp Display Celsius or Fahrenheit
Warning Alarms High & low Temp, Above set temp, Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Sensor Type Thermistor in housing
Overrun / Shutdown -10°C (14°F) below set/target temperature or 3 minutes

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 40°C (104°F) to 110°C (230°F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine's electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Kit Contents

Quantity Description
1x EWP130 Alloy Electric Water Pump 12v
1x EWP Digital Controller Assembly
1x Wiring Harness (inc 10a fuse)
1x Temp Sensor 1/4" NPT
1x Inline Adapter 35mm (38mm inc hose sleeves)
4x Hose Clamps
1x EWP Hardware Bag
1x Electrical Hardware Bag
2x Velcro Mounting Strips
1x Instruction Sheet


Supplied with full installation instructions.