Exoracing Turbo Downpipe Gasket For Mitsubishi Evo 4-9 4G63 Stainless

Why Use Exoracing Mitsubishi Evo 4-9 4G63 Turbo Downpipe Gasket?

At Exoracing, we aim to deliver nothing but the best when it comes to parts for your automotive project. With modern manufacturing techniques and the best possible materials used, we know you will be happy with your Exoracing purchase. 

Your turbo downpipe gasket is responsible for stopping exhaust leaks between your turbo and downpipe. Eliminating any leaks is essential, as not only will this detrimentally affect your performance, but it can also be an MOT failure, as those harmful exhaust gases can pass into the cabin. 

Extremely precise cutting and pressing machines are used in manufacturing to guarantee that your gasket will have OEM levels of fitment. We have opted to craft our pressed gaskets from 304 stainless steel, which offers excellent formability when being pressed and is extremely resistant to heat and corrosion. 

We highly recommend using a new gasket each time your turbo is removed. You also need to check that all mating flanges are free from warpages or defects, as this could lead to exhaust gas leaks. 

Purchase Includes:

• 1 x Exoracing Evo 4-9 4G63 Turbo Downpipe Gasket
• 1 x Exoracing Lifetime Warranty

Features:

• Constructed from 304 stainless steel.
• OEM levels of fitment.
• Fits Mitsubishi Evolution 4-9 4G63
• Only weighs 26 grams!
• High resistance to heat and corrosion.
• Stops exhaust leaks from your turbo to downpipe join.
• Exoracing Lifetime Warranty.

Exoracing Exoracing Mitsubishi Evo 4-9 4G63 Turbo Downpipe Gasket Installation Guide:

We've put together an installation guide to ensure you can correctly install your new gasket and eliminate exhaust leaks. We recommend a professional installation if you're not confident working with your car. 

1. Before starting to work on your car, make sure your engine is switched off, and all components have cooled down to avoid burns. 
2. Start by removing the hardware that connects your turbo to your downpipe. 
3. If you're lucky, you may get enough room to change your gasket without fully removing your downpipe, but it will make access easier. 
4. Remove your old gasket and check the condition of the mating faces on your turbo and downpipe. If they are clean and free from warpages and defects, then you can simply swap in your new gasket. If any of the above are found, then you must get both mating faces resurfaced to ensure a perfect seal. 
5. Use a calibrated torque wrench to tighten all hardware that was removed between your turbo and downpipe to the manufacturers' specs. 
6. At this point, we recommend running your car through a couple of heat cycles. Once it has cooled down, recheck that all the hardware is still at the correct torque specs. 
7. You can now enjoy your Evo, knowing you have eliminated your exhaust leak. Don't forget to tag us in any pictures using @exoracinguk.

Technical Specifications:

Notes: 

• We always recommend a professional installation. 
• To ensure a leak-free seal, all mating surfaces should be clean and free from warpages and defects. 
• A new gasket must be used each time your turbo is removed.