FREE UK MAINLAND SHIPPING OVER £50

phone: 01392 949012

K-tuned are honda specialists, specifically the Honda K-Series engine, as their name suggests, and manufactures a whole range of aftermarket parts such as billet fuel rails, billet shifters, throttle bodies and much more.

  • K-Tuned K-Tuned K20 Upper Coolant Housing For Rwd W/ Hose Fitting 32Mm

    K-Tuned

    K-Tuned K20 Upper Coolant Housing For Rwd (W/ Hose Fitting) 32mm

    Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. Features a -16OR (O-Ring) Outlet When putting a K20 into a RWD vehicle the housing typically points towards the firewall. This housing is designed for the fitting to come straight off the...

    $148.79 (Inc. VAT)
    $123.99 (Ex. VAT)
  • K-Tuned K-Tuned Pre Fit Heater Hoses Honda K-Swap

    K-Tuned

    K-Tuned Pre Fit Heater Hoses For Honda K-Swap

    Applications: EG, DC2, EK (EKK2 mounts only) NOTE: These only fit with K20A/A2/A3 and Z1 engine or cylinder heads. Check out our K-Tuned pre-fit silicone heater hose kit. If you plan to keep your heater core, these 4-ply silicone hoses are exactly...

    $125.53 (Inc. VAT)
    $104.61 (Ex. VAT)
  • K-Tuned Billet Oil Cap

    K-Tuned

    K-Tuned Billet Oil Cap

    After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right away that this oil cap is not just specific to the K-Series engine, it will fit all Honda engines. For a design, we weren't trying to reinvent the wheel here,...

    $66.95 - $71.14 (Inc. VAT)
    $55.80 - $59.29 (Ex. VAT)
  • K-Tuned K-Tuned K-Swap 4-2-1 Budget Header 409 Series Steel K-Tuned K-Tuned K-Swap 4-2-1 Budget Header 409 Series Steel

    K-Tuned

    K-Tuned K-Swap 4-2-1 Budget Header 409 Series Steel

    Applications: K20 and K24 in EG, DC2, EK (Hasport EKK1 and EKK2 mounts are both OK) This header is capable of making very good power on relatively stock or mild engine setups. The main focus while designing our K-Tuned Swap Header was to blend...

    $600.00 (Inc. VAT)
    $500.00 (Ex. VAT)
  • K-Tuned K-Tuned Shifter Cable Grommet

    K-Tuned

    K-Tuned Shifter Cable Grommet

    On K-swapped cars without heater cores and top mounted shifters, most people seem to pass the shifter cables somewhere through the firewall. Sometimes the existing hole for the heater core is used and sometimes people prefer to drill a new hole slightly...

    $81.32 (Inc. VAT)
    $67.77 (Ex. VAT)
  • K-Tuned K-Tuned K-Series Slave Cylinder

    K-Tuned

    K-Tuned K-Series Slave Cylinder

    Application: K-Series Transmissions The K-Tuned Slave Cylinder is a great upgrade for those wanting to replace leaking or worn out OEM units. Many new K-Series cars (05-06 RSX, 06+ Civic Si) use a slave cylinder that has an internal oil restrictor that...

    $110.08 (Inc. VAT)
    $91.74 (Ex. VAT)
  • K-Tuned K-Tuned Ac and Ps Eliminator Pulley Kit - Universal K20 K24 K-Tuned K-Tuned Ac and Ps Eliminator Pulley Kit - Universal K20 K24

    K-Tuned

    K-Tuned Ac & Ps Eliminator Pulley Kit - Universal K20 K24

    Applications:  Fits all K20 and K24 engines   Note: * This kit deletes both A/C and P/S, there is NO way to keep them with this kit * If you wish to keep A/C you can use the Adjustable EP3 Pulley Kit, and purchase your own belt The...

    $375.75 (Inc. VAT)
    $313.13 (Ex. VAT)
  • K-Tuned K-Tuned K-Series K20A K20A2 Steel Oil Pan Sump Package

    K-Tuned

    K-Tuned Steel Oil Pan Sump Package For Honda K-Series

    Note: DOES NOT FIT WITH K20Z3 ENGINE WITH OEM OIL PUMP. Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an DC5 TYPE...

    $243.90 (Inc. VAT)
    $203.25 (Ex. VAT)
  • K-Tuned Dip Stick For Honda K20 K24

    K-Tuned

    K-Tuned Dip Stick For Honda K20 K24

    Application: K20 and K24 Valve Covers When installing the dip stick please verify the stock levels with the mark on your new K-Tuned dip stick. You can scribe new marks if needed. There are too many variations with angles of motors, oil pans, and...

    $131.66 - $289.86 (Inc. VAT)
    $109.72 - $241.55 (Ex. VAT)
  • K-Tuned K-Tuned 4-2-1 K-Swap Header Eg Dc2 Ek K-Tuned K-Tuned 4-2-1 K-Swap Header Eg Dc2 Ek K-Tuned K-Tuned 4-2-1 K-Swap Header Eg Dc2 Ek

    K-Tuned

    K-Tuned 4-2-1 K-Swap Header Eg Dc2 Ek

    Applications: K20 and K24 in EG, DC2, EK (Hasport EKK1 and EKK2 mounts are both OK) The popular K-Tuned 4-2-1 Swap Header for K-series engine swaps is back again with some improvements. This header is capable of making very good power on relatively...

    $758.19 (Inc. VAT)
    $631.82 (Ex. VAT)
  • K-Tuned K-Tuned B-Series Slave Cylinder

    K-Tuned

    K-Tuned B-Series Slave Cylinder

    Application: Hydraulic B/D-Series Transmissions The B-Tuned Slave Cylinder is a great upgrade for those wanting to replace leaking,worn out, or just ugly OEM units. The B-Series slave cylinder is cast aluminum and will not corrode like OEM. It is a...

    $110.08 (Inc. VAT)
    $91.74 (Ex. VAT)
  • K-Tuned Fuel Rail Black W/ Gauge (W/ Efi Ftgs, Aa Delete)

    K-Tuned

    K-Tuned Fuel Rail Black W/ Gauge (W/ Efi Ftgs, Aa Delete)

    Applications:  02-05 Civic EP3 02-04 RSX DC5 05-06 RSX DC5 04-08 TSX CL 06-15 Civic Si  This rail will match factory K-series cars hardline. Note: * Includes mounting bolts, 8AN port plug, 6AN Fitting and EFI fitting. The K-Tuned multi-port...

    $352.61 (Inc. VAT)
    $293.85 (Ex. VAT)
  • K-Tuned K-Tuned K-Series Steel Oil Pan Sump

    K-Tuned

    K-Tuned K-Series Steel Oil Pan Sump

    Note: DOES NOT FIT WITH K20Z3 ENGINE WITH OEM OIL PUMP. Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an DC5 TYPE...

    $215.14 (Inc. VAT)
    $179.28 (Ex. VAT)
  • K-Tuned K-Swap Centre Mount Fuel Pressure Gauge Including Fitting

    K-Tuned

    K-Tuned K-Swap Centre Mount Fuel Pressure Gauge Including Fitting

    K-Tuned has designed a one piece fitting that uses the existing center port on our rail to properly mount the fuel gauge in the center of our rail just below the K-Tuned logo. The resulting look is very clean, compact and is very easy to install. The...

    $81.32 (Inc. VAT)
    $67.77 (Ex. VAT)
  • K-Tuned K-Swap Conversion Wiring Harness Civic Ek 99-00

    K-Tuned

    K-Tuned K-Swap Conversion Wiring Harness Civic Ek 99-00

    Applications: 1996-1998 or 1999-2000 EK Civic Note: All Australia EK use 1996-98 harnesses. We stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We?ve used...

    $295.10 (Inc. VAT)
    $245.92 (Ex. VAT)
  • K-Tuned K-Tuned K-Swap Race Header 409 Series Steel K-Tuned K-Tuned K-Swap Race Header 409 Series Steel K-Tuned K-Tuned K-Swap Race Header 409 Series Steel

    K-Tuned

    K-Tuned K-Swap Race Header 409 Series Steel

    Applications:K20 and K24 in EG, DC2, EK (Hasport EKK1 and EKK2 mounts are both OK) The K-Tuned Race Header offers a proven 4-1 design with a true slip-fit merge collector for maximum exhaust flow. The Race header is designed to deliver power gains in...

    $715.05 (Inc. VAT)
    $595.87 (Ex. VAT)
  • K-Tuned K-Tuned Oem Spec / Street Shifter Cables

    K-Tuned

    K-Tuned Oem Spec / Street Shifter Cables

    Applications: 2002-2006 DC5 TYPE R (All models), K-swapped EF, EG, EK, DC2 with k20A/A2/A3/Z1 transmission K-Tuned OEM-Spec / Street Shifter Cables are a strong and cost effective replacement for all OEM 2002-2006 DC5 TYPE R cables. Fitment and overall...

    $471.38 (Inc. VAT)
    $392.81 (Ex. VAT)
  • K-Tuned K-Tuned Side Mount Pulley Kit - K24 Crv Mount Style

    K-Tuned

    K-Tuned Side Mount Pulley Kit - K24 (Crv Mount Style)

    Applications: K20A/A2/Z1/Z3 and all K24A Series engines. Note: K24 bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including DC5 TYPE R and 8th Civic Si...

    $446.97 (Inc. VAT)
    $372.48 (Ex. VAT)
  • K-Tuned K-Tuned Timing Chain Side Post Mount Bracket - K20

    K-Tuned

    K-Tuned Timing Chain Side Post Mount Bracket - K20

    Applications: K20 and K24A engines. Note: K24 bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including DC5 TYPE R and 8th Civic Si. (This will NOT fit...

    $163.17 (Inc. VAT)
    $135.97 (Ex. VAT)